The Design M FabriPulse pulse-jet dust collector meets the needs of industrial dust collection applications that have low air volume and require small, compact filter sizes. It is engineered to give years of efficient service and minimum downtime in continuous-duty dust collection applications.
When combined with the optional integral fan and final filter, the Design M dust collector is a completely packaged air filtration system that allows recirculation of cleaned air.
The Design M dust collector uses 16 oz. fine denier stratified (needlefelt) polyester that enables a 99+% efficiency, high operating air-to-cloth ratio, and excellent dust cake release at minimum pressure loss. Bag lengths are 4 and 6 feet with other fabrics available.
Flour & Mixes
Plastics & Rubber
Rock & Related
Furniture Manufacturing & Cabinetry
Abrasive Cleaning & Sandblasting
Provides continuous dust collection at 99+% efficiency.
Fine multi-denier polyester fabric allows low operating pressure drop. Compressed air requirement is minimal. Optional final filter allows recirculation; eliminating the need for conditioned make-up air.
Operation is continuous and fully automatic. Complete 42-bag cartridge can be replaced in minutes.
Compact design utlitzes unique small diameter filter bags.
Long Service Life
The rugged design and 12 gauge construction; premium quality bag fabric; and superior cleaning system mean many years of trouble-free service.
ISO 9001 Certified Quality System
Available in two module sizes, one Millennium module contains 96 bags, and the other module contains 144 bags. Each module is available in four heights and can accommodate fabric bag lengths of 8, 10, 12, or
14 feet long, as well as pleated bags.
Since each Millennium will be constructed from a combination of these two basic modules, the size of the collector is almost limitless.
With a wide range of media fabrics to choose from, we can cost-effectively design a dust collection system to meet the needs of any industrial process. It can be installed in virtually plant location.
Designed to adapt to changes in emission regulations, the Millennium can change along with your process changes. Just use the flexibility of
bolt-together assembly and modular construction to connect, dismantle, or add units without obtaining new operating permits.
Foundries - Shake Outs, Sand Handling, Transfer Points, Reclaim
Cement - Rotary Kiln, Bagging, Cement Block
Metal Working - Cutting, Grinding, Polishing, Weld Fume, Battery Manufacturing
Food Processing - Cereals, Pet Food, Sugar, Milk Solids, Candy, Nut Shells, Flour and Mixes
Municipal - Refuse Transfer Stations, Incinceration, Composting
Woodworking - Furniture Manufacturing and Cabinetry
The solid-state timer that intiates pulse-jet cleaning of the filters is adjustable for both pulse interval and duration. An electronic differential pressure switch is also available which initiates cleaning when the pressure drop reaches a preset level. This miniumzes compressed air usuage and maximizes bag life. The pressure control is also available with an after-shift pulse option.
Normally, less than 1.0 SCFM of clean, dry compressed air will be required for each 1,000 CFM of dust-laden air. Actual requirements will vary with the dust loading, air-to-cloth ratio and specifics of the application. Air-to-cloth ratios normally vary between 3:1 and 15:1, depending on the physical and chemical properties of the dust.
Pressure drop across the collector is fairly constant as a result of continuous cleaning of the bags. Pressure drop will vary with the air-to-cloth ratio, temperature of the gas stream, dust loading, and characteristics of the dust. Normally, pressure drop will range from 3: to 6: w.g.